Specification |
SDI digital Video Signal * SDI IN/OUT 1 channel SDI Input & 1 channel SDI Output HDMI digital Video Signal * Digital Signal in 1 channel HDMI input,support 1080P,720P(if add sdi, not hdmi) Video Test Signal mode NTSC/PAL (Auto adapt) Video Output Mode 1.0 Vp-p Display 7inch TFT-LCD, 800(RGB)×600 resolution LCD adjustment Brightness, Contrast, Saturation adjustable Video IN/OUT 1 channel BNC Input & 1 channel BNC Output VGA input display VGA Input Receive VGA signals from DVR、NVR Video Level test Level test Video signals measured in IRE or mV Video Level meter Video Level meter Video signal PEAK level, SYNC level, COLOR BURST chroma level measurement DC12V 2A power output DC12V power output Output DC12V/2A power for camera 5V power output Power output Output 5V power for mobile phone,used as power bank Audio input test Audio input test test the pickup and other audio equipments on the front-end PTZ controller Communication Support RS232 and RS485 PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. Baud Rate 600,1200,2400,4800,9600,19200,57600,115200bps Video Signal Generation Color bar generator Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) UTP Cable tester UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box. RS485 /232data analysis Data Monitor Captures and analyzes the command data from controlling device 10x Zoom Image Image 10x zoom 10x zoom image display and video out Photograph、Video record, Record playback Photograph snapshot and save the current image as JPG file Video record Video record and storage the file Record playback To view the storage file in the SD card Port flicker Port flicker Find the connected POE port quickly. IP scan、Link monitor、PING test IP scan Find out the connected IP camera or the other network equipment IP address quickly. Link monitor Check the IP address whether is occupied PING testing Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address Cable scan Cable scan Through the audio signal to find out the correct cable quickly from the tangle some and clutter cabling system when installing or maintaining the cctv security system or cabling system PoE test PoE test Display the power supply voltage and cable connection states Digital Millimeter * AC/DC Voltage 0-660V auto/manual range, the min resolution is 0.1mV AC/DC current 660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A Resistance 660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ Capacitance 6.6nf~66000uF, the min resolution is 1pf Diode 0~2V forward voltage, the min resolution is 1mV Data hold Hold and display the measured value Relative measurement Display the relative power value Continuity testing Built-in buzzer will sound, if resistance is lower than 30Ω Testing speed 3 times/ seconds Data range -6600~+6600 Optical power meter * Calibrated Wavelength(nm) 850/1300/1310/1490/1550/1625nm Power range(dBm) -70~+10dBm Sensitivity(nW) 0.001nW Connector type FC/PC Data hold Hold and display the measured value Relative measurement Display the relative power value Visual fault locator * Visual fault locator Test fiber’s bending and breakage ( SM and MM fiber) TDR Test * TDR Test breakpoint and short circuit measurement (BNC cable, telephone cable) POWER Power Adapter DC 12V(2A) Battery Built-in 7.4V Lithium polymer battery, 6500mAh Rechargeable After charging 6-8 hour, working time lasts 17 hours Low Consumption Energy saving technology, the battery icon real-time display Parameter Operation setting OSD menu,more than 9 languages optional ( English, Portuguese, German, French, Spanish, Italian, Russian etc) Auto off 5-60 (mins) Keytone On/Off General WorkingTemperature -10℃~+50℃ Working Humidity 30%~ 90% Dimension/Weight 256mm x 173mm x 50mm / 1.2kg |
Packing Details |