Sitemap    Feedback
Home About us Products Service Contact Us
Multifunction CCTV tester
Function & Characteristic.
The new CCTV tester is developed for the On-Site installation and maintenance of IP camera, analog camera and network device, with Video display, PTZ control etc.
—3.5 inch full-view TFT-LCD, 480(RGB)x320
—low consumption, work for 11 hours
—OSD menu, English, Chinese and other languages optional
—LCD screen brightness/contrast/color Saturation adjustable
—Automatically identify and adapt the video mode of NTSC and PAL
—Enhanced colorbar generator,by receiving the video color bar to test the video channel whether transmit normally
—Moveable Micro SD
—LED Lamp, easy to operate at night
—User-defined shortcut keys(F1 and F2)
—Cable scan, send the specific signal, easy to find the connected cable
—10x zoom,video image can be magnified to view the details, easy to use
—Snapshot and save the current image as JPG file in the SD card
—Optical power meter, used for optic fiber CCTV monitor system, CATV system, optic fiber communication networks deployment and test
—Digital multimeter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing.
—PING testing,test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether is right
—IP address scan, quickly search the IP address for the connected IP camera and other network devices
—POE voltage measurement, test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices
—Device Port flicker, easy to find the connected POE switch port by sending special signals, the connected POE port will flicker at special frequency.
—Link monitor; check the setting IP address whether occupied
—TDR break point and short – circuit measurement( BNC cable, network cable etc)
—PTZ address scan, search up the ID of PTZ camera.
—Network cable and Telephone cable testing, display the sequence of connection and the No
of the LAN cable
—Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,
— Support RS232/RS485/RS422, rate 600 ~ 115200bps adjustable
—Lithium Ion Polymer Battery. The device employs advanced power control and protection circuit
—Display the data and image in on the screen at the same time.
—Easy for use that the train is almost unnecessary.

Video Test
Signal mode
NTSC/PAL (Auto adapt)
3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel Output
Video Output Mode
1.0 Vp-p
Video Level test
Level test
Video signals measured in IRE or mV
PTZ controller
Support RS232 and RS485
PTZ Protocol
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate
Video Signal Generation
Color bar generator
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP Cable Test
UTP cable test
Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output
 Output DC12V1A power for camera
Cable Scan
Cable Scan
Search the cable by the audio signal
Audio input test
Audio input test
test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor
Captures and analyzes the command data from controlling device
10 x zoom of image
Image 10x zoom
10x zoom image display and video out
Photograph,Video record, Record playback
snapshot and save the current image as JPG file
Video record
Video record and storage the file
Record playback
To view the storage file in the SD card
Port flicker
Port flicker
Find the connected POE port quickly.
IP scan, Link monitor, PING test
IP scan
Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor
Check the IP address whether is occupied
PING testing
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
POE tester
POE tester
Display the power supply voltage and cable connection states
Optical power meter
Calibrated Wavelength(nm)
Power range(dBm)
Connector type
Data hold
Display data hold
Relative measurement
Display the measurement value
Digital Multimeter
AC/DC Voltage
0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current
660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
6.6nf~66000uF, the min resolution is 1pf
0~2V forward voltage, the min resolution is 1mV
Data hold
Hold the measurement optical power value
Relative measurement
display the difference value of the first testing result
Continuity testing
Built-in buzzer will sound, if resistance is lower than 50 Ω
Testing speed
3 times/ seconds
Data range
TDR Tester
TDR Tester
breakpoint and short circuit measurement(BNC cable, telephone cable)
Power Adapter
DC 5V(1.5A)
Built-in 3.7V Lithium polymer battery ,3000mAh
After charging 3-4 hour, working time lasts 11 hours
Low Consumption
Energy saving technology, the battery icon real-time display
Operation setting
English/Chinese and other languages OSD menu
Auto off
5-60 (mins)
Key tone
Working Temperature
Working Humidity
Dimension/ Weight
194mm x 112mm x 48mm / 540g
Packing Details
Copyright © 2003 Huashi Technology Co., Limited All Rights Reserved.
Waterproof IR Camera,Dome Camera,CCTV System Kit,DVR Card,Surveillance Equipment,Digital Video Recorder(DVR),CCTV Tester,Sport Camera.